Other Parts Discussed in Thread: BQ28Z610,
I've completed a learning cycle with the bq28Z610 EVM, but intend to use the -R1 part in my product. Can I use the Golden Image from the "plain" chip on the -R1?
Thank you,
-Michael
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I've completed a learning cycle with the bq28Z610 EVM, but intend to use the -R1 part in my product. Can I use the Golden Image from the "plain" chip on the -R1?
Thank you,
-Michael
Hi Michael,
The bq28z610-R1 and bq28z610 are based on slightly different hardware platforms and therefore the -R1 firmware cannot be used for bq28z610.
I would suggest you solder a bq28z610-r1 device to the EVM and also use the bq28z610-R1 firmware to do the learning cycle.
Andy