• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 63 subscribers
  • Views 403 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPS61022: TPS61022

TPS61022: TPS61022

ANURAG PULLABHOTLA
Prodigy 30 points
Part Number: TPS61022
Dear Zack Liu,
Thanks for your immediate response. Here we are doing R&D on this particular IC for our application. So,we mounted it on a general purpose PCB and tested. Initially it seems to be fine but later it started troubling us.
One more question is that can we leave "Enable" pin floating? Will that effect the functionality of our IC? Please let us know the test conditions to be followed if we have any. Can you share your email ID, so that we can communicate with you in future too..
Thanks and Regards
Anurag P
9008684764

pullabhotla_anuraag@yahoo.com

  • 0
    TI__Mastermind 34231 points

    Hi Anurag,

    It's not recommended to use a general purpose PCB to test a high frequency switching power supply IC.The PCB is very important for a power device.

    You can buy a TPS61022 EVM on TI.com to evaluate this device.

    Is pullabhotla_anuraag@yahoo.com your email address? 

  • 0 in reply to Zack Liu
    Prodigy 30 points

    Dear Zack LU

    Thanks a lot for your quick response. One more question left with me is that can we leave "EN" pin floating? will it give any problem for IC?

    pullabhotla_anuraag@yahoo.com is my email ID.

    Thanks and Regards

    Anurag P

    9008684764