BQ34110: DRD Warning Counts after power loss ?

Pial

Part Number: BQ34110

Dear team,

Would you be able to help me with below questions ? Thanks a lot!

In a system where the GasGauge sometimes loses power. Will "DRD Warning Counts = 3" still work as described in the Reference Manual or will the history of DRD warning calculations be forgotten at every power cut?

Best regards,

over 5 years ago

0 Wyatt Keller over 5 years ago

TI__Guru** 105590 points

Hello Pial,

We'll look into this and get back to you soon.

Sincerely,

Wyatt Keller

0 Wyatt Keller over 5 years ago

TI__Guru** 105590 points

Hello Pial,

The DRD Warning counts is saved in DataFlash so it would be remembered after a power loss, but if the power loss happens before an event is stored in DataFlash then the data could be lost.

Sincerely,

Wyatt Keller

0 user1648850 over 5 years ago in reply to Wyatt Keller

Prodigy 20 points

Great thanks for your answer!

Br,

Hampus

0 Wyatt Keller over 5 years ago in reply to user1648850

TI__Guru** 105590 points

Hello,

So I contacted the design team to confirm that DRD cycle counts was stored in DF, but they informed me DRD cycle counts are stored in RAM so the information will be lost.

Sorry for the confusion, I hope this helps!

Sincerely,

Wyatt Keller

Power management

Power management forum

BQ34110: DRD Warning Counts after power loss ?