according to this picture,
There is one pin that connects 103AT.
But as far as I know, 103AT has two pins.
What should I do?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
according to this picture,
There is one pin that connects 103AT.
But as far as I know, 103AT has two pins.
What should I do?
Hi Jeong,
Connect the thermistor parallel to R10 in the typical schematic shown above. The other connection point is GND.