TPS5450: Confirm if inductor can be placed on the bottom of PCB

Jonathan Geronga

Part Number: TPS5450

Hi Team,

Our customer would like to confirm if it is okay to place the inductor at the bottom side of the PCB for their PCB design?

Please let me know if it is not recommended for this device.

Thanks,

Jonathan

over 5 years ago

0 Arief Hernadi over 5 years ago

TI__Mastermind 23845 points

Hi Jonathan,

In general it should be ok and you can put multiple vias from the SW node to the inductor for current.

Thanks

-Arief

Power management

Power management forum

TPS5450: Confirm if inductor can be placed on the bottom of PCB