BMS products which support SMBus Quick Command protocol

Matt Schurmann

Other Parts Discussed in Thread: BQ25710, BQ24780S, USB2ANY

Hello,

I am with a different BU in TI. Does BMS have any SMBus products which support the SMBus Quick Command protocol? If so, we may like to order an EVM to validate an SMBus/PMBus tool we have in development.

over 5 years ago

0 Jeff F over 5 years ago

TI__Guru**** 171556 points

Matt,

The BQ25710 and BQ24780S are two of the latest chargers with SMBus.

Just curious, is tool part in GUI Composer with USB2ANY?

Regards,

Jeff

0 Matt Schurmann over 5 years ago in reply to Jeff F

TI__Genius 11095 points

Hi Jeff, Do either of these devices support SMBus Quick Command protocol? Maybe this will just get treated as a bad transaction? (e.g. missing data bytes).

This is related to the upcoming replacement for the USB-to-GPIO dongle. https://www.ti.com/tool/USB-TO-GPIO

0 Jeff F over 5 years ago in reply to Matt Schurmann

TI__Guru**** 171556 points

Matt,

Our chargers don't appear to use quick command. You might try the battery gauge team (BGP). Many of their products start with BQ27xxx.

Regards,

Jeff

Power management

Power management forum

BMS products which support SMBus Quick Command protocol