In my application, the PWM, LED2, and BL_ADJ pins will not be used. Please advise how these pins should be terminated in the design.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
In my application, the PWM, LED2, and BL_ADJ pins will not be used. Please advise how these pins should be terminated in the design.
Hi David,
PWM, BL_ADI pin should be connected to GND. LED2 may be left floating.
BR,
Robin