This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24780S: ACOK pullup resistor

Part Number: BQ24780S

In BQ24780S datasheet , Ti suggest to use a 10k ohm resistor  to pull up ACOK to the pullup supply rail . 

My question is why the resistor is 10k ohm ,  can I use  a high value resistor such as 200k ohm here ?

The 10k ohm resistor cause high leakage current in my board .