This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM431: LM431BIM3N1C vs LM431BIM3/NOPB

Part Number: LM431


In our project, which is on mass production stage already, we applied LM431BIM3N1C.

Now LM431BIM3N1C is NRND-device, and it's replaced by LM431BIM3/NOPB.

What are the HW differences between these two devices, and what are the important points we should take care about when migrating from LM431BIM3N1C to LM431BIM3/NOPB?

Thank you.