Hi
In the LM317L datasheet, the minimum of output current is 2.5mA, can we place a resistor to ground on output pin to get 2.5mA current to make sure the LM317L work properly?
or do you have other suggestions? thank you
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
In the LM317L datasheet, the minimum of output current is 2.5mA, can we place a resistor to ground on output pin to get 2.5mA current to make sure the LM317L work properly?
or do you have other suggestions? thank you
Hi Betty,
Yes you can do this, this is the preferred choice to obtaining the 2.5mA load requirement.
Thanks,
- Stephen