• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 110 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BQ76PL455A-Q1: ADC value suddenly all 0 for single scan

BQ76PL455A-Q1: Reading 0's

Mehmet Ugras CUMA
Prodigy 165 points
Part Number: BQ76PL455A-Q1

Hi Jason, what was the programming issue? We are facing a similar problem and try to figure it out.

Thanks

Mehmet

  • 0
    TI__Genius 9401 points

    Hi Mehmet,

    Thank you for your question. On the thread you referenced, plotting the OUT pins is what pointed Jason to the reason for the problem in their case. Please let us know the details of the issue you are facing to be able to provide additional support. Specifically:

    • What is exactly the issue and when does it happen?
    • What software (e.g. GUI or TI sample code) and hardware (e.g. TI EVM) are you using?

    Best regards,

    Leslie