CCS/UCD3138: Power management forum

maxwell168

Part Number: UCD3138

Tool/software: Code Composer Studio

Dear expert:

Hi,I am an engineer.Recently,I purchased a development board about UCD3138.My company wants to develop related products and I hope to do some researchs，so I hope you can provide some routine programs，especially some programs about Phase-shifted full bridge.This is important for me and my research.

Looking forward to your reply!

Best Wishes

Maxwell

over 5 years ago

0 Yitzhak Bolurian over 5 years ago

TI__Mastermind 18370 points

Hello Maxwell,

The best place to start is:

https://www.ti.com/tool/UCD-TRAINING-LABS

after you get familiar with working with UCD3138 and the tools then you can find the phase shifted full bridge code at:

UCD3138 Phase Shift Full Bridge Firmware

Hope this helps.

Regards,

0 Yitzhak Bolurian over 5 years ago in reply to Yitzhak Bolurian

TI__Mastermind 18370 points

Besides the labs that you could download from the first(above) link that was provided, the link below can be a very good introduction:

https://training.ti.com/search-catalog/categories/products?keywords=ucd3138&start%5Bdate%5D=&end%5Bdate%5D=

Regards,

0 maxwell168 over 5 years ago in reply to Yitzhak Bolurian

Prodigy 80 points

Thank you reply! But I need some open source programs,which I can use directly.I have sonsumed some sales ,they said that TI own it .So you can give me some helps,thank you!

0 Yitzhak Bolurian over 5 years ago in reply to maxwell168

TI__Mastermind 18370 points

Hello Maxwell,

The requested source program is at:

UCD3138 Phase Shift Full Bridge Firmware

that was previously provided to you.

Isn't source code for phase shifted full bridge EVM what you asked for?

Regards,