• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 371 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Texas Instruments alternatives for MAX20095

Furkan Fehmi Sefiloglu
Expert 3118 points

Hi Team, 

Can you please support with best alternatives we can offer to MAX20095ATIA/VY+ from TI.

Thanks in advance

Furkan Sefiloglu

  • 0
    Prodigy 40 points

    Hello,

    Your application e-call and vehicle telematics and necessarily we need provide emergency case battery options, in time of crash vehicle cutoff switch activating and shut down vehicle power,

    The device on board GSM LTE RF baseband which is power consumption 3.9vdc 2.0A 217 hz power peaks.

    Single pack lithium ion battery packs starts form 4.1vdc and drops 3.1vdc in this application need boost hall system about 5vdc from battery pack.

    On current  design we are using MAX20095ATIA our concern on this PMIC no temperature control JEITA compliance all JEITA procedure handling by our sub system power management mcu.

    Regards

    Arslan Keles

     

     

  • 0 in reply to Arslan Keles1
    TI__Genius 12485 points

    Hi Furkan,

    I heard that one of my colleagues Will has reached out to you so I will close this thread out. 

    Thanks, 

    Gautham Ramachandran 

  • 0 in reply to Gautham
    Prodigy 40 points

    Hi Furkan,

    Could you please share with us solution 

    Thanks,

    Arslan