Hi Sir,
customer want to know how do set total power budget of TPS23882? must set up I2C and control? or auto mode function?
if customer want set 2-pair to 60w, can it?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Sir,
customer want to know how do set total power budget of TPS23882? must set up I2C and control? or auto mode function?
if customer want set 2-pair to 60w, can it?
Hi Tommy, yes the customer must use I2C since this is a non-standard application. You can increase the policing power to 60W on one channel using the GUI for the EVM. I recommend ordering a TPS23882EVM-008. You can set the port to semi-auto mode, power up to two pair, then increase the policing power to 60W on one channel. Thanks!