• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 266 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS22925: Schematic_Feedback

Arumugam Palaniyandi
Expert 1040 points
Part Number: TPS22925

Hi,

In our design we are considering to use LOAD switch for 0.75V input.

Can you please review and share any comments.

Input voltage : 0.75V

Output Voltage : 0.75V / 1A

Thanks and Regards,

Arumugam.P

  • 0
    TI__Genius 10652 points

    Hi Arumugam.P, 

    As long as you are driving ONpin with open-drain transistor which would necessitate the pullup then your schematic looks good to me. 

    Please let me know if any further questions, but let me know if all your questions were answered by pressing the green buttons. 

    Best

    Dimitri