Hi Team,
Just want to check if there is min VO cap on near side of the pin.
Customer plan to remove the cap near the pin due to size limitation and just keep the cap on remote side.
Also, the min total VO cap is 30uf, right?
BRs
Given
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
Just want to check if there is min VO cap on near side of the pin.
Customer plan to remove the cap near the pin due to size limitation and just keep the cap on remote side.
Also, the min total VO cap is 30uf, right?
BRs
Given
Hi Given,
You can recommend customer to place a small cap near the pin, and place the rest of the output cap at the load side. The min total Cout is 30uF.
Regards,
Weidong
Hi Weidong,
Thanks for your reply.
30uf is effective capacitance or nominal value?
Also,what is the min recommendation of cap puting near side?
BRs
Given
Hi Given,
30uF is nominal value. You can place 1uF at near side.
Regards,
Weidong