• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 326 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ISO5452: pull up resistor

kura
Genius 4850 points
Part Number: ISO5452


We found pull up resisteor values for RDY,FLT are 10kohms in datsheet.

If you have other recommend pull up resistor value for other PINs,please let us know it.

  • 0
    TI__Genius 13760 points

    Hi Kura,

    Welcome to E2E!

    The RDY and FLT pins are the only open drain outputs of the ISO5452 which need a pull up resistor in order to measure the diagnostics from the gate driver.

    Let me know if there's a pin in specific you were concerned about.

    Best regards,

    Andy Robles