• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 176 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ34Z100EVM: Chip already calibrated?

Art Mecina
Genius 16655 points
Part Number: BQ34Z100EVM
Other Parts Discussed in Thread: BQ34Z100

Hello Guys,

Just like to confirm if the  the calibration voltage and current is already done by TI for one cell upon shipment of the BQ34Z100EVM?

Thanks!

Art

  • 0
    TI__Guru** 105590 points

    Hello Art,

    The default calibration parameters are in the gauge, we always recommend calibrating the gauges before use though. Since the bq34z100 is a top of stack gauge it wouldn't really matter the cell count since it is always divided down or the internal division is used for single cell.

    Sincerely,

    Wyatt Keller