LM317L: ESD SPEC

Brian Wang0928

Part Number: LM317L

In the datasheet, it mentioned that the V(ESD) is 3000V,max for HBM. It is +/- 3KV, or only +3KV. i have a little confused on it. Thanks.

Regards

Brian W

over 4 years ago

0 Jason Song over 4 years ago

TI__Mastermind 23361 points

Hi Brian,

The ESD and HBM for new LDOs are normally qualified at both positive and negative voltages, but this one has only specified the positive side. Plese allow 2 business days for me to investigate this for you.

Regards,
Jason song

0 Blake Soileau over 4 years ago in reply to Jason Song

TI__Intellectual 1200 points

Brian,

We were able to confirm with the reliability engineering team that the LM317L ESD ratings were qualified using positive and negative voltage strikes which is aligned with the JEDEC standard.

Power management

Power management forum

LM317L: ESD SPEC