• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 64 subscribers
  • Views 264 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BQ34Z100-G1: Bqstudio cell chemistry making

BQ34Z100-G1: Making Chem ID in BqStudio

Samruddhi Patil
Prodigy 210 points
Part Number: BQ34Z100-G1
Other Parts Discussed in Thread: GPCCHEM

Dear Sir,

I'm from India. I want to create new Chem ID in Bq Studio by sending cells to Texas Instruments.

I'm aware of GPCChem tool. as cell manufacturer is new so i want to create it custom chem id.

Please guide.

Regards,

Pratik

  • 0
    TI__Guru** 105590 points

    Hello Samruddhi,

    Can you share your GPCCHEM report so we can check how much of a mismatch there has been? Running new IDs is costly and most of the time is not needed because there are many good matches using the tool.

    Even if the cell manufacturer is new it is likely there is already a characterized cell that will be a good match for the battery you're using.

    A single cell needs to be characterized using the procedure on the GPCCHEM page.

    Sincerely,

    Wyatt Keller

  • 0 in reply to Wyatt Keller
    Prodigy 210 points

    Dear Sir,

    sorry for late response. i was busy with some other work.

    I haven't performed the learning cycle for GPCCHEM tool.

    After receiving GPCCHEM report if i have any doubts then ill contact you.

    Thank you so much for your time & help.

    Regards,

    Samruddhi