• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 306 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS2596: TPS2596 Short-circuit current detection threshold

user4960855
Prodigy 50 points
Part Number: TPS2596

Hi team, 

I'd like to learn about the short-circuit behavior.

The ISC(Short circuit current) detection threshold is not described in the data sheet.
I think that the magnitude of the inrush current will change depending on the usage, but please tell me the detection threshold.

Regards,

Hashimoto

  • 0
    TI__Guru* 79181 points

    Hi Hashimoto,

    The current through the device increases very rapidly during a short-circuit event. If the current exceeds 1.5xILIM, the device engages a fast current clamping circuit to regulate down the current faster than the nominal overcurrent response time (tLIM).

    For more information please refer the datasheet section 8.3.3.3 Short-Circuit Protection .


    Regards

    Kunal Goel