This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ35100EVM-795: Automated reading capture and logging

Part Number: BQ35100EVM-795
Other Parts Discussed in Thread: BQSTUDIO

I am using bq35100EVM board for battery discharge status and end of services. At present it is manual procedure. I want this process should be automated (all GE_Start, GE_stop). Every 5 minutes data should be captured and log to PC (bqStudo Application) through USB till EOS (totally discharged battery) is set. It may take few days. It should run continuously. Please suggest the bqStudio setting