UCD9080 Component Symbol request

Fred Kleytman1

Prodigy 30 points

Other Parts Discussed in Thread: UCD9081, UCD9080

Where I can find TI component symbol in the library for UCD9080 & UCD9081.?

Thank you.

Fred

over 3 years ago

0 yihe over 3 years ago

TI__Guru 60800 points

Hello

We do not recommend UCD9080 for any development. Please use UCD9081 which is Pin to Pin compatible to UCD9080.

You can get the symbol at https://webench.ti.com/cad/ via typing UCD9081 as device.

Regards

Yihe

0 Fred Kleytman1 over 3 years ago in reply to yihe

Prodigy 30 points

I have got a response from Yihe:

-------------------------

Hello

We do not recommend UCD9080 for any development. Please use UCD9081 which is Pin to Pin compatible to UCD9080.

You can get the symbol at https://webench.ti.com/cad/ via typing UCD9081 as device.

Regards

Yihe

--------------------------------

I really appreciate your response, I've got a symbol at the suggested place,

there was two files

RHB0032E.stp and UCD9081_RHB_32.bxl

Neither one is recognized by TI PSpice when I tried to Generate part.

What I am missing?

Thank you,

Fred Kleytman

0 yihe over 3 years ago in reply to Fred Kleytman1

TI__Guru 60800 points

Hello

The symbol is for CAD/EDA and PCB layout purpose. It is not designed for SPICE. As mentioned in other post, UCD9081 does not have a spice mode for simulation since it is not a analog device.

Regards

Yihe

0 yihe over 3 years ago in reply to yihe

TI__Guru 60800 points

Hello

We haven't heard from you for a while and assumed that the issue has been solved. Please reply if any further help is needed.

Regards

Yihe

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Power management

Power management forum

UCD9080 Component Symbol request