BQ25606EVM-772: BQ25606EVM Design files and inductor alternative

Zak Blomerus

Part Number: BQ25606EVM-772

Good day,

Could you please send the PCB schematic and layout files of the BQ25606EVM to zak@fullfacing.com?

Also, have alternative inductors been validated on the EVM? The MPIM252010F1R0M-LF that was used is not readily available on Digikey or similar. Would the Samsung CIGT252012LM1R0MNE be a valid alternative?

Kind Regards,

Zak

over 4 years ago

0 Ning T over 4 years ago

TI__Guru 57341 points

Zak,

We will check if we are able to send the EVM files to you.

For the output inductor, other inductors with similar specs should be fine. The EVM User's guide also provides alternative output inductor L1 - part number 74437321010 from Wurth.

Thanks,

Ning.

0 Zak Blomerus over 4 years ago in reply to Ning T

Prodigy 90 points

Thank you Ning for providing feedback on the inductors.

As per this ticket in the link below it doesn't appear to be a problem to send the design files. It would just make it a lot easier to follow the reference design.

https://e2e.ti.com/support/power-management/f/196/t/672701

Kind Regards,

Zak

0 Ning T over 4 years ago in reply to Zak Blomerus

TI__Guru 57341 points

Zak,

Sent.

Thanks,

Ning.

Power management

Power management forum

BQ25606EVM-772: BQ25606EVM Design files and inductor alternative