• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 173 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ34Z100-G1: Protect function by TS

K.Shidara
Expert 3225 points
Part Number: BQ34Z100-G1

Hi Team,

Does BQ34z100-G1 have any safety battery protection function

other than the remaining amount calculation depending

on the battery temperature detected by the TS terminal?

(If it works, what will it be like?)

Thanks

Best regards,

Shidara

  • 0
    TI__Guru** 105590 points

    Hello Shidara,

    The bq34100-g1 doesn't control any protection FETs so it has minimal detection for safety events.

    If you check the TRM in Table 3-10. Alert Configuration Register Bit Definitions, this shows the alerts that can be indicated externally.

    Sincerely,

    Wyatt Keller