TPS92682-Q1: Configuration for single channel use

NOBUO FUJIHARA

Genius 9335 points

Part Number: TPS92682-Q1

Hi team,

My customer wants to use 1channle only with TPS92682-Q1.

SPI interface to control current, CC operation, and package size, those features match to customer's requirement.

Could you provide HW configuration and register setting for this use case?

Best regards,

over 4 years ago

0 Caroline Fuschino over 4 years ago

TI__Intellectual 1675 points

Hello Nobuo,

Thank you for reaching out about this. One of our engineers will help answer your question within 24 hours. In the meantime, please feel free to look at our TPS92682-Q1 support on TI.com.

Best Regards,

Caroline

0 Tuan Tran74 over 4 years ago in reply to Caroline Fuschino

TI__Mastermind 18890 points

Hello Nobuo,

All the register setting are described in the data sheet and they and the settings are specific and dependent of each design and external component. If there is specific questions then we can help with that but there is no blanket setting for every design.

There are also evaluation boards and firmware that you can obtain for your customer to help with his design.

Thanks Tuan

0 NOBUO FUJIHARA over 4 years ago in reply to Tuan Tran74

TI__Genius 9335 points

Hi Tuan,

May I shift to email base Q&A?

regards,

0 Tuan Tran74 over 4 years ago in reply to NOBUO FUJIHARA

TI__Mastermind 18890 points

Hi Bobuo,

Yes you can send me an email directly.

Thanks Tuan

Power management

Power management forum

TPS92682-Q1: Configuration for single channel use