24VDC to 120VAC, 3kW Design

Dajon McGill

Other Parts Discussed in Thread: TIDM-HV-1PH-DCAC, TIDM-02008

Hey Team,

Do we have a reference design that could be adapted to support the a 24VDC to 120VAC 3kW inverter design?

Do we have any combination of ICs that can support this conversion?

Best,
Dajon McGill

0 John_K over 4 years ago

Dajon,

As I replied previously, you need at least 2 stages (dc/dc + Inverter) to meet the spec.

There is a bidirectional 400V-12V dc/dc converter but it can not go up to 24 V input and the rated power is limited to 300 W.

Currently, we don't have a reference design that fits this application.

Best,

John

0 Dajon McGill over 4 years ago in reply to John_K

Hey John,

Thank you for your help here.

Do you know of an inverter reference design that will work as the second stage to achieve this conversion?

Best,
Dajon McGill

0 John_K over 4 years ago in reply to Dajon McGill

TIDM-HV-1PH-DCAC supports both VSI and Grid-tied mode. If you need Grid-tied mode only, TIDM-02008 can work.

Best,

John

Power management forum