Hi
could you help check the LM5022 schematic as below and any need to adjust
Thank you
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
could you help check the LM5022 schematic as below and any need to adjust
Thank you
Hi GARETH,
Thank you for considering LM5022. I'll review the schematic and get back to you.
Thanks,
Yinsong
Hi GARETH,
Sorry for the delay. Here are the comments.
1. The sensing resistor needs to be smaller.
2 Add a high frequency cap to comp as well in case need to adjust the high frequency gain later.
Please let me know if there is any question.
Thanks,
Yinsong