• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 351 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ35100: BQ35100

Manish Mistry
Prodigy 150 points

Part Number: BQ35100

Hi,

I am using lithium thionyl chloride battery.
I just want to measure battery percentage from 10-99% like battery percentage shows in mobile. 
will this device read accurate battery percentage for Lithium thionyl chloride battery?

Cell Design Capacity mAh : 2700 (mAh)
Cell Design Voltage : 3.6V

Regards,

Manish Mistry

  • 0
    TI__Guru** 107675 points

    Hello Manish,

    The SOH accuracy in EOS mode (EOS mode is designed for LTC batteries and uses resistance correlation) depends on the system and battery. As stated in the TRM, the accuracy will need to be examined for the specific system. The main purpose of EOS mode is to give an alert near EOS.

    You can use ACC mode and calculate on your MCU how much charge passed correlates to the SOH.

    Sincerely,

    Wyatt Keller