LM60430: LM60430 Spice model simulation not working

Vinod Kumar Guravareddygari1

Part Number: LM60430

I downloaded the SPICE model from TI wesite for simulation. As per my requirements I got the schematic from the WEBENCH tool. With this same schematic I cant able to run the simulation in the SIMetrix tool which I got the output voltage is <0.5V with reference to WEBENCH result subject to 5V output. Here I attached the webench design and SIMetrix schematic for reference.https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/LM60430.7z

over 4 years ago

0 Daniel Li14 over 4 years ago

TI__Mastermind 27470 points

I do the same simulation , it also can't been work right, I can check with Spice modelling team see any help we can get from them. but they may need time to solve the issue. If I have some update, I will let you know

Alternative way is you can install Pspice-TI to simulate this device.

Thanks

0 Daniel Li14 over 4 years ago in reply to Daniel Li14

TI__Mastermind 27470 points

I have submit this issue to our modelling team, but I don't know whether and when they will fixed this issue, I will close this question.

thanks

Power management

Power management forum

LM60430: LM60430 Spice model simulation not working