• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 164 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

GPC Chemi Tool for 10P26S Battery

Munekazu Sugimoto
Prodigy 100 points

Hi 

We want to use BQ Gauge device for  Our Bayyety Pack.

* We thinking use BQ34z100G1 as Gauge.

And we want to use  GPCCHEMI  tool for get Chemi ID.

[ Question ]

  This Battery pack is verr big and  10 Paralle  and 26 Stack .

  How to measute  GPC Chemi  Charge  / Dis Charge data ??

  For instance    10P Battery  just thinking as 1cell  ??

 Could you tell us how to use  GPC Chemi Tool with  10P26S Battery pack ??

 

Regard

Jasper 

  • 0
    TI__Expert 3205 points

    Hi Jasper,

    Single cell for CHEM ID match is recommended. Once you get the CHEM ID and programmed it, then do a learning cycle based on the whole battery pack (10p26s) and the related parameters would update. You can refer SLVA725A for CHEM ID match.

    Sincerely,

    Jayden Li