This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25570: Skip LBUCK and VOUT SET divider

Part Number: BQ25570


I designing sollar charger for my project but i dont have enough place and trying tu reduce components on PCB, is possible to skip LBUCK and resistor divider for VOUT SET, tied VOUT SET, VOUT EN to GND. Will the charger work normaly? I powering my MCU from Li-Pol battery via externall converter because i need sometimes more than 300mA. It is posible?