Other Parts Discussed in Thread: TLV61046A
HI TI expert,
I have the requirements as below:
Vin=2.5~3.3V
Vout=12V
Iout max=80mA
TPS61096A is selected for our design to meet the above requirements.
But when I try to generate the schematic with the WEBENCH Power Designe, an error happen to warn the current limit is exceeded, but the max current is 0.5A.
It look the tool set the current to 0.05A. Please check it. and also please to check if TPS61096A can meet my requirement?
Thanks