Hi Team,
There is a good new that we DIN UCC27511 ,
Please help to check the SCH,THX
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
There is a good new that we DIN UCC27511 ,
Please help to check the SCH,THX
Hello,
Thanks for help promoting our drivers.
Consider adding a small series R<100-Ohms on IN+ pin for filtering the PWM signal.
You may also add a 2nd parallel decoupling capacitor 4.7uF close to C116 and pin 1 to effectively filter noise and source/sink peak current at the gate.
Otherwise, the rest of the circuit looks OK.
Regards,
-Mamadou
Hello,
Thanks for help promoting our drivers.
Consider adding a small series R<100-Ohms on IN+ pin for filtering the PWM signal.
You may also add a 2nd parallel decoupling capacitor 4.7uF close to C116 and pin 1 to effectively filter noise and source/sink peak current at the gate.
Otherwise, the rest of the circuit looks OK.
Regards,
-Mamadou
Hello,
Thanks for help promoting our drivers.
Consider adding a small series R<100-Ohms on IN+ pin for filtering the PWM signal.
You may also add a 2nd parallel decoupling capacitor 4.7uF close to C116 and pin 1 to effectively filter noise and source/sink peak current at the gate.
Otherwise, the rest of the circuit looks OK.
Regards,
-Mamadou
Hello,
Thanks for help promoting our drivers.
Consider adding a small series R<100-Ohms on IN+ pin for filtering the PWM signal.
You may also add a 2nd parallel decoupling capacitor 4.7uF close to C116 and pin 1 to effectively filter noise and source/sink peak current at the gate.
Otherwise, the rest of the circuit looks OK.
Regards,
-Mamadou