BQ40Z60EVM-578: need PcbDoc, PrjPCB, SchDoc Exported to Altium ASCII (to Import to Cadence/Orcad formats [brd, opj, dsn])

TK82

Intellectual 725 points

Part Number: BQ40Z60EVM-578

Hi (Bryan),

This is a new post but really i am re-opening a post that was 'Resolved' with a 'Verified Answer' (below).

Not sure if this is the best way to get your attention(??)

However,

can you please export the bq40z60EVM-578 Altium files to ASCII format?
using the guide you originaly quoted,
www.orcad.com/.../OrCAD_Altium_Migration_Guide.pdf

fyi, Cadence/Orcad tech support reponded saying the files are binary (Altium native) and we need Altium ASCII to import to Cadence/Orcad.

thanks,
Tom

over 7 years ago

0 Bryan Kahler over 7 years ago

TI__Mastermind 25955 points

Hi Tom,

Thanks for referencing the last post - here are the converted ASCII versions of the files.

Sincerely,

Bryan KahlerPWR578A.PcbDoc PWR578A.SchDoc

0 TK82 over 7 years ago in reply to Bryan Kahler

Intellectual 725 points

hi Bryan,

Thanks for the following files:

PWR578A.PcbDoc

PWR578A.SchDoc

but, the following files are also needed:

PWR578A.PrjPcb

PWR578A.PrjPcbStructure

Here is the Migration Guide:

see attached for the Error summary..Altium_to_Orcad_Migration_Err.docx

Tom

0 Bryan Kahler over 7 years ago in reply to TK82

TI__Mastermind 25955 points

Hi Tom,

Thanks for the heads up. Here is the complete directory after conversion from the binary format to the ascii format.

Please let me know how the ORCAD conversion turns out!

Sincerely,

Bryan Kahler

tidre95_ascii.zip

0 TK82 over 7 years ago in reply to Bryan Kahler

Intellectual 725 points

hi Bryan,

Nice job!!
we are well on our way now....

Both Schematic and Layout files converted and now we will do a sanity check on them.

thanks,
Tom

Power management

Power management forum

BQ40Z60EVM-578: need PcbDoc, PrjPCB, SchDoc Exported to Altium ASCII (to Import to Cadence/Orcad formats [brd, opj, dsn])