[FAQ] AM62L ( AM62L32 , AM62L31 ) Custom board hardware design - Design notes and Review notes for Reuse of EVM TMDS62LEVM Schematics

Hi Board designers, 

Good to hear on your plan to reuse the SK-AM62B schematics to design the custom board.

Refer below note:

Always refer to the latest design files, for TMDS62LEVM AM62L evaluation module

Refer below recommendations or guidelines for custom board schematic design improvement.

1. Schematics Reuse guidelines:

 Refer below FAQ

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1478025/faq-am62l-custom-board-hardware-design---reusing-ti-evm-design-files

2. Notes (D-Note, R-Note and Cad Note) for Board designers

The Schematic has a number of D-Note(s), R-Note(s) and Cad Note(s) added. Ensure you read through these notes before start of the board design during initial architecture stage, during the design and before board fabrication and build.

D-Note (Design note) - The design notes provide guidelines for design improvements and optimization. Review the design notes carefully and make the required updates.

R-Note (Review Note) - The review notes provide guidelines to review the design to ensure the required components are populated and the design follow the data sheet recommendations. Use this along with the hardware design guide and schematic design check list.

Cad Note: Guidelines for layout 

3. Schematics Updates 

There are few component values and mounting option changes that have been made in the schematics. We are working on the list of changes and will add to this FAQ.

Refer below schematics:

Standard PDF 

7558.PROC181E1-1_SCH_With_Design_Updates..Notes_V1.0.pdf

Intelligent PDF for viewing component information 

PROC181E1-1_SCH_With_Design_Updates..Notes_V1.0_Smart.pdf

Additional Files 

Recommending checking the AM62L product folder for updates 

Pin Attributes 

Regards,

Sreenivasa