Hi,
We are trying to start debug session with Cortex M4 with JTAG (Blackhawk USB200). We set Target configuration properly. IR & DR integrity test is passing. but while try to connect target getting below.
"Cortex_M4_IPU1_C0: Trouble Halting Target CPU: (Error -1266 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 8.4.0.00006) "
Please help on this to resolve issue as soon as possible. Any kind of document is there please share it.
Thanks in advance
Uthayakumar RH