SK-AM62: List of register initialization values

Hi Tashiro-san,

as you probably already know our device-specific TRMs usually list the power-on defaults for all registers. On top of that the device datasheets outline the default pinmux related settings. Note however that many register values are changed as the device starts up, for example by operation of (ROM-)bootloader and any user software. So without understanding the nature of your request better it is difficult to give an appropriate answer.

What specifically is the customer looking for? Or what do they intend to do with those values?

Regards, Andreas

Hi Andreas,

Andreas Dannenberg said:

What specifically is the customer looking for? Or what do they intend to do with those values?

They want to use Excel based document to consolidate all registers in AM62x.
They know address and reset values are available in TRM, but it is time consuming to copy & paste all of them manually.
This is the reason they are asking for the register table in Excel format.
And they are planning to modify our SDK initialization values as starting point, so the initialization values are preferred.

Thanks and regards,
Koichiro Tashiro

Hi Tashiro-san,

understood. I've routed your question to our HW expert, perhaps he can help.

Regards, Andreas

Hello Tashiro-san,

I checked with the design team internally and looks like we will not be able to support the request.

The recommendation was to use any of the debugging tools available on the board and dump the registers.

Regards,

Sreenivasa

Hi Sreenivasa,

Kallikuppa Sreenivasa said:

I checked with the design team internally and looks like we will not be able to support the request.

What is the reason we cannot support the request?
Simply because we do not have such information?

Thanks and regards,
Koichiro Tashiro

Hello Tashiro-san,

Thank you.

Koichiro Tashiro said:

What is the reason we cannot support the request?
Simply because we do not have such information?

Your understanding is correct.

The recommendation was to use any of the debugging tools available on the board and dump the registers.

Regards,

Sreenivasa