J784S4XEVM: FPDLink Camera Support

Rishabh Jain

Part Number: J784S4XEVM

Hello,

We are getting started with using the J784S4XEVM evaluation board and wanted to use the board (running the QNX PSDK) with a camera. It seems from the documentation that the IMX390 is supported out of the box. Do you have a part number for specific camera module compatible with this board? Is it a CSI camera or do you support FPD-LINK IMX390 as well. In case of the FPD-LINK support, do you have a part number for the daughter board required to add the deserializer to the evaluation board?

Thanks!

over 2 years ago

+1 Praveen Rao over 2 years ago

TI__Mastermind 49983 points

Hello Rishabh,

Info can be found in below link:

https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-j784s4/09_00_01_01/exports/docs/imaging/imaging_release_notes.html#ImageSensor_Support_RTOS

https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-j784s4/09_00_01_01/exports/docs/psdk_rtos/docs/user_guide/release_notes_09_00_01_j784s4.html#release-notes-09-00-01

Thanks.

0 Rishabh Jain over 2 years ago in reply to Praveen Rao

Prodigy 20 points

Thanks - do you have the part number/ordering information for the "Fusion Board"?

This is what I found online (https://svtronics.com/portfolio/evm577pfusion-v1-0-fusion/) but it is not listed as compatible with the J784S4XEVM

0 Praveen Rao over 2 years ago in reply to Rishabh Jain

TI__Mastermind 49983 points

Yes, you have the right link.

See the EVM setup chapter that confirms this:

https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-j784s4/09_00_01_01/exports/docs/psdk_rtos/docs/user_guide/evm_setup_j784s4.html#fusion-daughter-card

Thanks.

Processors

Processors forum

J784S4XEVM: FPDLink Camera Support