• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 99 subscribers
  • Views 465 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SK-AM62A-LP: Need info to change slewrate and drive strength for EMMC and Ethernet data lines

Jaimin Patel
Intellectual 670 points

Part Number: SK-AM62A-LP

Tool/software:

Hello Team,

We are using AM62A34 SoC and DP83867IRRGZR part as ethernet phy.

We want to change slewrate and drive strength for Ethernet and EMMC data lines. Could you please point us where we can change this settings in BSP? Following are datalines information.

Ethernet data lines:
RGMII_TDx
RGMII_RDx (As per our understanding for RX signals we need to perform drive strength in phy(DP83867IRRGZR). Please provide change location for this as well.) 


For EMMC dataline:
MMC0_DATAx

 

Thanks

Jaimin