EVMK2GX: EVMK2G peripheral tests, setting up processor config for manipulation with CCS

Hi,

What did you mean by the .bin file? Was it the CCS installer?

Thanks,

Jianzhong

I was following a step by step for running GPIO examples for the EVMK2G, and it said that i had to install the processor in my computer, that installer was a bin file, I attached the link in my original question... Did you manage to use this board with CCS?... if so, I'd thank you to guide me with the process, I've been stuck with this for two weeks and all I want to do is a audio bypass (use a microphone line in, and listen to it form the line out).

Thanks,

Diego

Did you mean you were having troubles installing ti-processor-sdk-linux-k2g-evm-06.03.00.106-Linux-x86-Install.bin to your Linux PC?

Exactly

If you want to use the PDK example as suggested by the FAQ, you should download the PROCESSOR-SDK-RTOS-K2G from: www.ti.com/.../PROCESSOR-SDK-K2G

That's the processor I downloaded, but I still can't use the board from CCS, there are missing "packages" (I don't know if that's the correct word) such as keystone II.

Just to clarify what I'm trying to do, I need to use the board for DSP of audio signals.

Thanks for all your help, and I'm sorry if I don't explain myself clearly... I'm new to this and English isn't my main language 

Did you install the latest CCS? Please try an earlier version which was tested with the K2G PDK: https://www.ti.com/tool/download/CCSTUDIO/9.3.0.00012.

If you still run into problems, please upload the errors and we'll get the CCS team to help you.

Thanks, I've installed now the 9.3 version and solved the missing packages problem, but I still can't install the processor https://www.ti.com/tool/PROCESSOR-SDK-K2G#downloads, I'm starting to think that it's the version of Ubuntu that I'm using.. currently I'm using Ubuntu 20.04. One question, once I've executed the bin file, the next step is to run in terminal ./setup.sh, right?

Thanks, downgrading my Ubuntu version allowed me to install the processor correctly... the last question I have, is what other configurations should I do to bare-metal configuring this board? I haven't found other forum post about it.

I really appreciate your help so far.

Please take a look at: software-dl.ti.com/.../index_how_to_guides.html