Update for StarterWare on AM335X

Baskaran Chidambaram

We have made an incremental release (v 02.00.00.05) for AM335x on Dec 23rd 2011. The following are the major updates in this release,

Support latest EVM (Rev 1.1A) and Beaglebone board (A3).
Device Abstraction Layer for DCAN
Example applications to demonstrate
- DCAN board-to-board communication
- Accelerometer
- Audio Buzzer
- Temperature Sensor
- Haptics Motor
CCS and IAR projects for Power Management example applications
CCS and IAR projects for USB example applications

For more information please refer the release notes.

over 13 years ago

0 Madhvapathi Sriram over 13 years ago

Intellectual 485 points

Hi Baskaran,

The release notes mentions that the updated linker command files for usb CCS projects can be obtained from here:

https://gitorious.tif.ti.com/starterware/starterware-src/trees/master/build/armv7a/cgttms470_ccs/am335x/beaglebone/usb_dev_msc

But these do not seem to be accessible. Can you please verify?

Regards,

Madhvapathi Sriram

0 Baskaran Chidambaram over 13 years ago in reply to Madhvapathi Sriram

TI__Genius 17370 points

Thanks for the comment Sriram.

Since this is internal link it may not be accessible outside TI. I have uploaded the files in Processor wiki and updated the release notes with this link to download these files.

Regards

Baskaran

0 ZHU HONGXIAN over 13 years ago in reply to Baskaran Chidambaram

Prodigy 110 points

My AM335X EVM board can't work normally Based on StarterWare，but it can work based on linux or android system。And，I find that MLO which i get from StarterWare example can not boot the board。I spent a day to try，Phenomenon are all the same。
On the other hand，StarterWare work Normally on my BeagleBone board。
why？

0 Valentin Ivanov over 13 years ago in reply to ZHU HONGXIAN

Intellectual 350 points

Hello Zhu,

I don't have EVM board, but if I understand right the SW3 switch has to be set properly to select the right boot mode. Just a thought that might help.

Regards,

Valentin

Processors

Processors forum

Update for StarterWare on AM335X