AUDIO-AM275-EVM: Debugging Issues while running example code on AM275 EVM (C7x)

Hello,

Your screenshots did not go through. 

ArTzy said:

C75X_0: Error connecting to the target: (Error -2081 - (0:0:0)) Device functional clock appears to be off. Power-cycle the board. If error persists, confirm configuration and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 20.3.0.3656) 

Please see the section at the end called "Device functional clock":

https://dev.ti.com/tirex/explore/node?node=A__ANoamrIZPWD2-6T-NDDWGg__ccs_devtools__FUz-xrs__LATEST

I was able to successfully launch a debug session for a GPIO example for C7x of my AM275 EVM:

Hence I believe your issue is related to some hardware configuration issue. I will bring this thread to the attention of the device experts for further analysis.

Thanks

ki

Hello,

Thank you for your reply. Do you mind giving a quick example on how to configure the debugger? I am new to TI DSPs and CCS and would like some help in this to accelerate my project.

Thank you.

Best,

Tejas

Hi,

Thank you very much. This fixed the issue as the board wasn't initialized correctly.

Best,

Tejas