Sv04 decode demo not working.

Anshul Maheshwari

hi guys,

my sv04 mcsdk video demo is not working when i am decoding while it work when i encode a raw file.

my tftp.cfg file look like this ....

# Configuration file for SINGLE CORE operation
# New Input File Format is as follows
# <ParameterName> = <ParameterValue> # Comment
#
# See siuVctParse.h for a list of supported ParameterNames

##########################################################################################
# Configuration to TFTP Server
##########################################################################################
localIpAddress    = 10.218.109.175       # should be in the same subnet as TFTP server
localMacAddress   = 06-06-06-06-06-06
serverIpAddress   = 10.218.109.170         # should be in the same subnet as DSP
serverMacAddress = 00-90-F5-AB-FC-92

codecName         = H264DEC # Name of the codec (must be listed in siuVctsupportedCodecs.c)
encode_or_decode = DECODE    # ENCODE or DECODE
xdmVersion        = 0.9       # XDM version: 0.9 or 1.0
codecType         = VIDEO     # IMAGE, VIDEO, AUDIO
#encResolution     = 720p       # HD H264ENC resolution: 1080p or 720p
nCores            = 1           # Number of Cores involved in the decode/encode operation
coreTeamMapping   = 0         # Core IDs (0-based) involved in the decode/encode operation

i am giving *.264 file of 720p and i dont know its hp or bp.

over 13 years ago

0 Hongmei Gou over 13 years ago

TI__Expert 4335 points

Hi Anshul,

Please try with the following changes in tftp.cfg:

codedName = H264HPDEC

xdmVersion=1.0

sv04 has integrated H264HP decoder, and it can decode BP, MP, and HP clips.

Thanks,

Hongmei

0 Anshul Maheshwari over 13 years ago in reply to Hongmei Gou

Intellectual 790 points

hongmei u are genius

but can you tell me that what make you said that xdm=1.0 will work if xdm=0.9 is not working in code context

0 Paula Carrillo over 13 years ago in reply to Anshul Maheshwari

TI__Mastermind 40580 points

Hi Anshul,

For each encoder decoder you can check in the especific codec documentation which XDM version the codec is compliant with. Or easier you can see this info in the client wrapper .c file. For example from H264 HP decoder wrapper file (vctH264hpDecClient.c ) we have:

/******************************************************************************

* FILE PURPOSE: Client Wrapper to integrate XDM1.0 Compliant Decoder to TVCT

******************************************************************************

* FILE NAME: vctH264hpDecClient.c

Processors

Processors forum

Sv04 decode demo not working.