Software for SYS/BIOS on C6748

Daisuke Maeda

Guru 20385 points

My demands to C6748 as follows.

- JPEG Encoder

- USB Mass storage class (Both Slave and Device)

- FAT File System

I could find the following software.

http://processors.wiki.ti.com/index.php/BIOS_C6SDK_2.0_User_Guide

http://software-dl.ti.com/dsps/dsps_public_sw/codecs/C64XPlus_Video/index_FDS.html

http://software-dl.ti.com/dsps/dsps_public_sw/psp/BIOSPSP/index.html

http://software-dl.ti.com/dsps/dsps_public_sw/psp/BIOSUSB/index.html

http://software-dl.ti.com/dsps/dsps_registered_sw/sdo_sb/targetcontent//bios_file_system/index.html

However, Most of these are not supported by SYS/BIOS.
Are there other software supported by SYS/BIOS?

Or, must I use any other OS's?
But, I think that DSPBIOS is old system and Linux is large-scale system.

Best regards,

Daisuke

over 13 years ago

0 Shawn Steenhagen over 13 years ago

Expert 1535 points

Daisuke,

With regards to the FAT file system, if you are wanting the stand alone DSP device to be able to read/write FAT32, we offer a FAT32 file system for specific use with TI DSPs (and DSP-BIOS) and the 6748 platform. An overview of the filesytem/device driver is here:

http://www.appliedsignalprocessing.com/fatcfhd.htm

What storage device are you planning to use (I am guessing an SD card). What version of DSP-BIOS do you plan to use? Please contact us for further information.

thanks

-Shawn

0 Daisuke Maeda over 13 years ago in reply to Shawn Steenhagen

Guru 20385 points

Hi Shawn,

Thank you for the reply.

AM335x may be used with Starterware.
C6748 is not used at this opportunity.

Your solution will be used at another opportunity.

Best regards,

Dasiuke

Processors

Processors forum

Software for SYS/BIOS on C6748