Regarding DM6467 and DM6467t VPIF

Mayurkumar Akbari

Hi,

We have one 2k x 2k pixel array CMOS sensor. The sensor give 8-bit parallel raw output data.

we want to interface sensor with DM6467 or DM6467t VPIF. I had read the video port interface use guide and as per user guide In 8-bit raw video capturing mode, DM6467 can support upto 2048(H) × 1536(V) pixel array format.

Did DM6467t also can support upto 2048(H) × 1536(V) pixel array format or more?

Best Regards,

Mayur Akbari

over 12 years ago

0 Prabhakar Lad over 12 years ago

Guru 11260 points

Hi,

DM6467t also can support upto 2048(H) × 1536(V) pixel array format or more?

The DM6467T also supports the same pixel array size of 2048X1536.

For other minute differences refer this link http://www.ti.com/lit/an/sprab44b/sprab44b.pdf

Regards,

--Prabhakar Lad

http://in.linkedin.com/pub/prabhakar-lad/19/92b/955

0 Mayurkumar Akbari over 12 years ago in reply to Prabhakar Lad

Prodigy 130 points

Hi,

Thanks for your reply.

so, in raw capturing mode our sensor 2k x 2k pixel array can not interface with neither DM6467 or DM6467T? What do you think?

Regards,

Mayur Akbari

0 Prabhakar Lad over 12 years ago in reply to Mayurkumar Akbari

Guru 11260 points

Hi,

[Mayurkumar]so, in raw capturing mode our sensor 2k x 2k pixel array can not interface with neither DM6467 or DM6467T? What do you think?

[Prabhakar] Yes it cant be interfaced.

Regards,

--Prabhakar Lad

http://in.linkedin.com/pub/prabhakar-lad/19/92b/955

Processors

Processors forum

Regarding DM6467 and DM6467t VPIF