ReleaseRaw/liboglestools.a removed from Graphics_SDK 3_01_00_02?

John F.

Hello,

I'm using Arago to build libgles and the sgx Linux kernel modules. The gles/sgx build goes fine, but my application which was successfully using Graphics_SDK 3_00_00_06 fails because a non-X11 liboglestools.a is not in the SDK. Is there a known way to build liboglestools.a or is there another way to get this library for non-X11 applications?

Thanks!

John

over 16 years ago

0 Prabindh Sundareson over 16 years ago

TI__Expert 6580 points

Under the GFX_Linux_SDK/OGLES2/SDKPackage, you should find the "OpenGL ES 2.x SDK.User Guide.1.20f.External.pdf" document. If you are working on OGLES (GLES1.1), a similar document exists inside the OGLES folder.

Under the "Linux " section, you will see how to (re)generate non-X11 tools library.

0 John F. over 16 years ago in reply to Prabindh Sundareson

Intellectual 830 points

Ok, I see that the build instructions are in the Linux section of the User Guide, but was hoping the liboglestools.a build would already be done in Arago/OpenEmbedded.

Thanks for the reply,

John

0 John F. over 16 years ago in reply to John F.

Intellectual 830 points

As an experiment, I simply used the ReleaseX11/liboglestools.a and my application linked and ran. May not be a clean long-term solution, but it worked.

Processors

Processors forum

ReleaseRaw/liboglestools.a removed from Graphics_SDK 3_01_00_02?