Hi,
I have some question regarding the connection between AM3352 and TPS65217B.
1) Not used pin - If some pins of TPS65217B are not used, is it ok to keep NC?
For example, MUX_IN, nRESET, PB_IN, ISET1/2, ISINK1/2, FB_WELD, and so on.
2) I am connecting "PGOOD" of TPS65217B to "PWRONRSTN" of AM3352 directly. As I see the AM335xEVM,
PWRONRSTN line is pulled down to GND by external 100Kohm. Is this 100kohm resister needed to my schematic?
Please advise me.
Best regards,
Michi
