Packet Accelerator Preprocessing Difference between MCSDK_3_00_01_12 and MCSDK_3_01_01_04

Muhammed Beyaz

Hi folks,

My question is about difference between Packet Accelerator lut parsing according to MCSDK version.

I am using Packet Accelerator to preprocess IP packet. I don't insert any special configuration to Packet Accelerator for UDP port processing.

I used MCSDK_3_00_01_12 and now I upgrade my mcsdk version to MCSDK_3_01_01_04 .

When I was using MCSDK_3_00_01_12, I was receiving UDP packets and Packet Accelerator did not discard any of them. But now I am using MCSDK_3_01_01_04 and Packet Accelerator discards UDP packets. I do not change any configuration and code.

Is there any change between MCSDK_3_00_01_12 PDK and MCSDK_3_01_01_04 PDK ?

Thanks in advance,

Muhammed

over 11 years ago

0 Raja over 11 years ago

TI__Guru* 81335 points

Hi Muhammed,

Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages (for processor issues). Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics (e2e.ti.com). Please refer links below my signature.

We will get back you on the above query shortly. Thank you for your patience.

0 Titusrathinaraj Stalin over 11 years ago

TI__Guru** 116100 points

Have you checked the release notes of both MCSDK versions ?
You can get the release notes from the following link.

mcsdk_bios_3_01_01_04\docs\MCSDK_Release_Notes.pdf
mcsdk_bios_3_00_01_12\docs\MCSDK_Release_Notes.pdf

Processors

Processors forum

Packet Accelerator Preprocessing Difference between MCSDK_3_00_01_12 and MCSDK_3_01_01_04