[C6746] TLVH431 workaround for Advisory 2.3.18

Naoki Kawada

Guru 19890 points

Other Parts Discussed in Thread: TLVH431

Hi,

It appears my customer wants to know the typical schematic reference when applying TLVH431 as a workaround for Advisory 2.3.18.
Do you have any suggestions for such request ?

Best Regards,
Naoki Kawada

over 10 years ago

0 Senthilkumar Srinivasan over 10 years ago

TI__Mastermind 43660 points

Hello Naoki,

To my knowledge, we do not have a reference schematic publicly available for the TLVH431 workaround for Advisory 2.3.18. However, i will check if any reference is available internal to the TI and update you.

You could try refer the design that is available in TLVH431 product folder.

www.ti.com/.../toolssoftware

Regards,
Senthil

0 Naoki Kawada over 10 years ago in reply to Senthilkumar Srinivasan

Guru 19890 points

Hello Senthil,

Thank you always for your kind support. Ok, I'll wait for your feedback.

Best Regards,
Naoki

0 Senthilkumar Srinivasan over 10 years ago in reply to Naoki Kawada

TI__Mastermind 43660 points

Hello Naoki,

We do not have any reference board details which has this workaround implemented. So as i mentioned above, you could refer the shunt regulator design for your reference.

You could instead prefer to use capacitors to generate a load of 140mA.

Regards,
Senthil

0 Naoki Kawada over 10 years ago in reply to Senthilkumar Srinivasan

Guru 19890 points

Hello Senthil,

Thanks for your confirmation. Understood. I'll talk with my customer.

Best Regards,
Naoki

Processors

Processors forum

[C6746] TLVH431 workaround for Advisory 2.3.18